Sunday, April 14, 2019

Hack to prevent (solder) wire tangles

I just bought at Farnell some really good and really thin solder wire for small jobs.

The issue is the roll does not hold the wire coils enough si it keeps on creating knots.

I finally came down to this simple idea, which makes use of an elastic band that was offered by a random Chinese reseller, but a regular wide elastic band is probably as efficient. Just pull the last unwound wire under the band and it will hold the coils in place.

9 comments:

  1. This comment has been removed by a blog administrator.

    ReplyDelete

  2. Anyway cast-iron is basically used to make cookwares. This is a direct result of its capacity to retain elevated levels of warmth and its dispersion properties. It is a well known decision for burning, braising, long-cooking and the vast majority of all, browning. https://solderingironguide.com/reviews/weller-wlc200-review/

    ReplyDelete
  3. Essentially, these will be found anyplace where there is the prerequisite of lifting weighty items from one spot to the next.wire rope manufacturer in malaysia

    ReplyDelete
  4. To start with, purchase the entirety of the wiring that you think you'll need, and some extra only for wellbeing. Soow Cable

    ReplyDelete
  5. I ordinarily run my force wire on a similar side of the vehicle as the battery. I additionally generally run my RCA links down the focal point of the vehicle. Realizing this data will reveal to you where you need to eliminate parts from your vehicle. soow cable

    ReplyDelete
  6. Orbital frameworks give a way to guarantee high efficiency of welding and further developed weld quality. best 110v stick welder

    ReplyDelete
  7. The writer has outdone himself this time. It is not at all enough; the website is also utmost perfect. I will never forget to visit your site again and again. textbook answers

    ReplyDelete
  8. Nice one for discussing the knowledge. I recently uncovered the info tremendously valuable. easybom

    ReplyDelete
  9. The weldpro 200 vs titanium 200 is no longer produced. It has been replaced with theMiller Dynasty 210 DX CPS TIG Welder.

    ReplyDelete